A Liebherr D 914 TI engine overhaul was carried out in our company.
The engine overhaul included, among other things, the replacement of crankshaft bearings, connecting rod bearings and bushings, as well as cylinder liners and pistons along with rings. A regenerated fuel pump and injectors were installed in the fuel system. A new oil pump was installed in the lubrication system. In addition to the above, we installed a regenerated water pump.
In addition, the following were regenerated: crankshaft, connecting rods, cylinder heads, turbocharger, and starter and alternator.
Finally, the engine was assembled on a new set of seals, gaskets and filters.
After the repair, the engine was checked and preliminarily run-in on the engine dynamometer in our workshop.
