Service and repair of Kawasaki M5X hydraulic motor
Reconditioning, testing, and selection of parts for M5X hydraulic motor. Door-to-door pickup throughout Poland. Warranty up to 12 months.
- Original parts
- Dynamometer test report after repair
- Short lead times
- Technical support and replacement selection
Contact form
Typical symptoms of M5X hydraulic motor failure
Power loss
The motor loses driving force, the machine operates slower.
Noise and vibrations
Unusual sounds and vibrations indicating wear of internal components.
Overheating
During operation, the oil heats up quickly, affecting the motor's efficiency.
Leaks
Hydraulic oil leaks around the seals.
Kawasaki M5X variants and subtypes - all in one place
We service the entire family of M5X motor - various configurations tailored to construction machines.
M5X130
- Subtypes: M5X130CHB-10A-17B, M5X130CHB-10A-2BA-265, M5X130CHB-10A-30A
- Most common faults: wear of pistons, distribution disc
M5X130
- Subtypes: M5X130CHB-10A-30C, M5X130CHB-10A-31A, M5X130CHB-10A-31B
- Most common faults: noise, regulator leaks
M5X180
- Subtypes: M5X180CHB-10A-2KB, M5X180CHB-10A-60C
- Most common faults: overheating, cavitation
Other OEM versions
- Fit for machine manufacturer
- Service with parts selection according to the nameplate
*Nomenclature varies depending on the machine manufacturer - at WIBAKO we will select the appropriate configuration.
What we do as part of the service
Diagnostics & tests
Pressure measurement, flow tests, test bench verification.
Overhaul
Replacement of rotating elements, seals, surface finishing.
Calibration
Precise adjustment of valves and controls.
Upgrades
Selection of replacements and adaptations.
Door-to-door
Pick-up and delivery throughout Poland.
Warranty & report
Test protocol and warranty up to 12 months.
Supported machine brands
Manufacturer names for information purposes only – independent service.
What the repair process looks like
Contact
By phone or via the form.
Collection
We arrange a courier; on-site disassembly possible.
Diagnostics
Disassembly, measurements, cost estimate for approval.
Repair & test
Assembly, calibration, test bench verification.
Customer reviews
The machine works like new again. - Krzysztof
Full test report, quick turnaround time. - Andrzej
Good communication and solid reconditioning. - Tomasz
FAQ - frequently asked questions
-
#1.Hydraulic pump repair - where to start?
To start the hydraulic pump repair process, please contact our repair coordinator, Sebastian. You can call +48 33 870 42 05 or use the contact form on our website.
-
#2.How to deliver a pump for repair?
You have several options:
- Deliver it personally to our workshop.
- Send it by courier.
- After agreeing on the details, we can arrange courier transport.
If you are unable to disassemble the pump, our mobile service can come to you and perform this service. -
#3.What does the repair process look like?
- Dismantling and verification: after delivering the pump to the workshop, we dismantle it into parts and thoroughly verify any damages.
- Estimate and repair time: we prepare a detailed cost estimate and determine the expected completion time.
- Repair implementation: after your acceptance of the terms, we proceed with the repair.
- Testing and painting: after the repair is completed, we test the pump at the testing station.
- A positive test result means that the pump is ready and gets painted. -
#4.What does the offer include?
Our offer may include:
- An estimate for repairs using original parts (if available).
- An estimate for repairs using replacement parts.
- A proposal to purchase the same pump after repair from our warehouse (an alternative to repairing your pump).
- An offer to purchase a new device, if the particular model is in our warehouse. -
#5.How long does the repair of a hydraulic pump take?
Verification begins immediately after the pump is delivered.
You will receive an estimate for typical repairs within just a few hours.
The repair itself usually takes 3-5 business days. -
#6.How do we test hydraulic pumps?
After installation at the test station, the pump is subjected to loads simulating operation in a construction machine. We measure key parameters such as: pressure, flow, torque and oil temperature. We also check changes in efficiency with respect to pressure and the operation of the pump over a wide range of working temperatures. The full test lasts from 4 to 8 hours, depending on the type of pump.
-
#7.What is the warranty after repair?
We perform repairs, using original parts or proven substitutes. After repair, each pump is tested, and the results are documented in the form of a readable chart. Therefore, you receive a 6-month warranty for each repair. If you have any questions about installation or operation, you can use our free phone support.
-
#8.Can I cancel the repair?
Yes, you can cancel the repair after receiving the estimate without incurring any costs.
-
#9.How much does hydraulic pump regeneration cost?
The price depends on the type of pump and the extent of damage. If you provide us with the type of hydraulic pump, we can give you an approximate price range, based on our previous projects.
M5X service - ask for a quote
Contact us and learn the details of reconditioning the M5X hydraulic motor.
