Service and repair of Kawasaki M2X hydraulic motors
Reconditioning, testing, and selection of parts for M2X hydraulic motors. Door-to-door pickup throughout Europe. Warranty up to 12 months.
- Original parts
- Dynamometer test report after repair
- Short lead times
- Technical support and replacement selection
Contact form
Symptoms of M2X hydraulic motor damage
Power drop
The machine loses working power, especially under load.
Slow movements
The system reacts slower, arms and tracks operate with a delay.
Noise and vibrations
Unusual sounds and vibrations indicate wear of components.
Overheating
Increase in oil temperature and decrease in motor performance.
Kawasaki M2X variants and subtypes
We service the entire M2X family in various configurations. With the serial number and nameplate, we will select the appropriate parts and settings.
M2X120
- Subtypes: M2X120B-CHB-10A-08, -40, -49, -63, -64, -11A-05, -11A-12, -11A-20
- Typical faults: piston wear, pressure drop
M2X146
- Subtypes: M2X146B-CHB-10A-01, -06, -13, -17, -32, -33, -41, M2X146B-CNB-10A-06, M2X146-CHB-10A-40
- Typical faults: bearing damage, leaks
M2X150 / M2X170 / M2X210
- Subtypes: M2X150CHB-10A-07, M2X170CAB-10A-01, -04, -05, -07, M2X170CHB-10A-01, -11A-14, -15A-11, -15A-18, -15A-23, -15A-24, -15A-25, M2X210CAB-10A-16, -18, -56, M2X210CHB-10A-50
- Typical faults: cavitation, overheating, rotational damage
*WIBAKO provides full service regardless of the machine manufacturer in which the M2X motor operates.
What we do as part of the service
Diagnostics & tests
Pressure measurement, flow tests, test bench verification.
Overhaul
Replacement of rotating elements, seals, surface finishing.
Calibration
Precise adjustment of valves and controls.
Upgrades
Selection of replacements and adaptations.
Door-to-door
Pick-up and delivery throughout Poland.
Warranty & report
Test protocol and warranty up to 12 months.
Supported machine brands
Manufacturer names for information purposes only – independent service.
What the repair process looks like
Contact
By phone or via the form.
Collection
We arrange a courier; on-site disassembly possible.
Diagnostics
Disassembly, measurements, cost estimate for approval.
Repair & test
Assembly, calibration, test bench verification.
Customer reviews
Professional repair and quick turnaround. - Krzysztof
The machine regained full power. - Tomasz
Clear pricing and complete documentation after repair. - Andrzej
FAQ - frequently asked questions
-
#1.Hydraulic pump repair - where to start?
To start the hydraulic pump repair process, please contact our repair coordinator, Sebastian. You can call +48 33 870 42 05 or use the contact form on our website.
-
#2.How to deliver a pump for repair?
You have several options:
- Deliver it personally to our workshop.
- Send it by courier.
- After agreeing on the details, we can arrange courier transport.
If you are unable to disassemble the pump, our mobile service can come to you and perform this service. -
#3.What does the repair process look like?
- Dismantling and verification: after delivering the pump to the workshop, we dismantle it into parts and thoroughly verify any damages.
- Estimate and repair time: we prepare a detailed cost estimate and determine the expected completion time.
- Repair implementation: after your acceptance of the terms, we proceed with the repair.
- Testing and painting: after the repair is completed, we test the pump at the testing station.
- A positive test result means that the pump is ready and gets painted. -
#4.What does the offer include?
Our offer may include:
- An estimate for repairs using original parts (if available).
- An estimate for repairs using replacement parts.
- A proposal to purchase the same pump after repair from our warehouse (an alternative to repairing your pump).
- An offer to purchase a new device, if the particular model is in our warehouse. -
#5.How long does the repair of a hydraulic pump take?
Verification begins immediately after the pump is delivered.
You will receive an estimate for typical repairs within just a few hours.
The repair itself usually takes 3-5 business days. -
#6.How do we test hydraulic pumps?
After installation at the test station, the pump is subjected to loads simulating operation in a construction machine. We measure key parameters such as: pressure, flow, torque and oil temperature. We also check changes in efficiency with respect to pressure and the operation of the pump over a wide range of working temperatures. The full test lasts from 4 to 8 hours, depending on the type of pump.
-
#7.What is the warranty after repair?
We perform repairs, using original parts or proven substitutes. After repair, each pump is tested, and the results are documented in the form of a readable chart. Therefore, you receive a 6-month warranty for each repair. If you have any questions about installation or operation, you can use our free phone support.
-
#8.Can I cancel the repair?
Yes, you can cancel the repair after receiving the estimate without incurring any costs.
-
#9.How much does hydraulic pump regeneration cost?
The price depends on the type of pump and the extent of damage. If you provide us with the type of hydraulic pump, we can give you an approximate price range, based on our previous projects.
TITLE
ADDITIONAL INFORMATION
