# Renovation of the Volvo D12E Engine in the Volvo A40E Articulated Hauler

> The overhaul of the Volvo D12E engine in the Volvo A40E articulated vehicle is a comprehensive process that includes diagnostics, disassembly, regeneration, and testing on a dynamometer. Discover how WIBAKO restores power and efficiency to power units operating under challenging conditions.

## Volvo D12E Engine Overhaul in a Volvo A40E Articulated Dump Truck

The Volvo A40E articulated dump truck is designed to transport large quantities of material in demanding off-highway conditions. Working in quarries, open-pit mines, gravel pits and large construction sites requires not only a durable chassis but also a reliable and powerful engine. The power unit must deliver sufficient power and torque, particularly when starting with a full load, climbing steep gradients and operating for extended periods under heavy loads.

In this case, we carried out an overhaul of the **Volvo D12E engine** installed in a Volvo A40E articulated dump truck. The machine had started showing a gradual decline in performance. Although the engine was still running, its operating parameters were no longer satisfactory. Increased engine oil and fuel consumption were also observed. These symptoms indicated progressive engine wear, making detailed diagnostics necessary to determine the actual scope of the required repairs.

The work was carried out by the WIBAKO service team, a company with over 30 years of experience in construction machinery parts and servicing. Our services include engine diagnostics and overhauls, as well as engine removal and installation directly at the customer's site. In this case, our mechanics removed the engine from the machine and transported it to the WIBAKO facility in Kojszówka, where we carried out a comprehensive inspection and overhaul.

### Volvo D12E Engine Diagnostics Before the Overhaul

Before starting the Volvo D12E engine overhaul, we needed to determine the cause of the gradual loss of performance in the Volvo A40E articulated dump truck. In machines that have operated for many years under demanding conditions, natural wear of engine components can lead to a deterioration in performance. However, not every observed problem has the same underlying cause. For this reason, we began the diagnostic process with basic inspection procedures.

First, we analysed the symptoms reported by the machine operator. Particular attention was paid to the gradual loss of power, increased oil consumption and changes in the engine's operating characteristics. We also established whether the problems occurred under all operating conditions or became more noticeable primarily under heavier loads. When transporting a full load, the Volvo A40E requires significantly more effort from its engine than when travelling empty. Under such conditions, even progressive wear of internal engine components can become particularly noticeable.

Next, we checked the basic operating parameters. We inspected the engine oil level, the condition of the lubrication system and the tightness of visible connections. We also examined the cooling system and air intake, as irregularities in these areas can affect engine performance. The inspection also included the accessories and components working alongside the engine.

Due to the reported symptoms, a more detailed assessment of the engine's mechanical condition was necessary. A gradual loss of power combined with increased oil consumption can indicate wear of the cylinders, pistons and piston rings. In such cases, it is important to assess cylinder sealing and the engine's ability to maintain the correct compression pressure.

After completing the initial diagnostic procedures, we decided to carry out a comprehensive inspection following engine removal. Only by dismantling the engine into individual components can we accurately assess the condition of working surfaces, the crankshaft-piston assembly and other components responsible for the correct operation of the power unit.

### Removing the Volvo D12E Engine from the Volvo A40E Articulated Dump Truck

After confirming that an overhaul was necessary, we began preparing the Volvo A40E articulated dump truck for engine removal. Our mobile service team travelled to the machine's operating location near Kraków. This meant that the customer did not have to arrange transportation of the entire articulated dump truck to our facility. The engine was removed directly at the customer's site using a crane provided by the customer.

We started by properly securing the machine and preparing the working area. Before disconnecting individual components, it was necessary to immobilise the dump truck and protect systems that could be damaged during the operation. We then proceeded to disconnect the electrical installation, pipes and other accessories connected to the Volvo D12E engine.

Particular attention was paid to the cooling system. Before disconnecting the hoses, we secured the coolant circuit to prevent uncontrolled fluid leakage and contamination of other machine components. We followed a similar procedure with the air intake system. The air pipes and other connections were disconnected and protected against the ingress of dirt and foreign particles.

The next stage involved disconnecting the exhaust system, fuel lines and mechanical connections. We also removed accessories and mounting components that prevented safe removal of the engine from its compartment. Each hose and installation component was properly identified and secured. This approach makes subsequent installation easier and reduces the risk of mistakes when reconnecting the systems.

Once we had confirmed that all connections were properly disconnected, we prepared the engine for lifting. Using the crane provided by the customer, we carefully relieved the engine mounts. We then removed the remaining mounting bolts and began extracting the engine from the compartment. This operation required maintaining the correct engine position to avoid damaging adjacent structural components.

After removing the Volvo D12E engine, we inspected the accessible mounts and other components that would be reused during installation. The engine was then properly prepared for transportation. It was transported to our facility in Kojszówka, where we began a detailed technical inspection and established the scope of the overhaul.

WIBAKO carries out similar work on other construction and industrial machines. Our mobile service team performs engine removal and installation throughout Poland and also travels to customers in selected European countries. This allows us to repair power units without requiring the entire machine to be transported to our workshop.

### Inspection of Volvo D12E Engine Components at the WIBAKO Workshop

After the Volvo D12E engine arrived at our facility in Kojszówka, we began the detailed inspection process. The first stage involved preparing the unit for dismantling and assessing its overall technical condition. In engines with a long history of intensive operation, it is particularly important to evaluate each component individually. Not all parts necessarily wear at the same rate, which is why the scope of refurbishment is determined based on actual measurements.

The engine was dismantled into individual components. The removed parts were cleaned to eliminate oil residues, carbon deposits and other contaminants. Only properly cleaned components can be accurately assessed. Our mechanics inspected working surfaces, the condition of mating components and any signs of excessive wear, overheating or mechanical damage.

One of the most important areas of inspection was the **crankshaft-piston assembly**. Its condition directly affects cylinder sealing, compression and the engine's ability to transfer loads correctly. We inspected the pistons, piston rings, cylinder liners, connecting rods and bearings. Particular attention was paid to mating surfaces, as even minor dimensional deviations can affect the subsequent operation of the engine.

We also inspected the crankshaft. In addition to a visual assessment, we measured the main and connecting rod journals, checked crankshaft runout and inspected the oil passages. It was important to identify any signs of overheating, scoring or other wear. The crankshaft transfers the forces generated during combustion into rotational movement. Its proper technical condition is therefore one of the fundamental requirements for reliable engine operation.

The connecting rods were also inspected for geometric accuracy, surface condition and possible deformation. The inspection included checking for twisting and longitudinal bending, as well as examining the surfaces that work with the crankshaft and pistons. These components must maintain the correct dimensions because they are subjected to significant mechanical loads during engine operation.

Another important component was the Volvo D12E cylinder head. Its condition directly affects combustion chamber sealing, proper gas exchange and heat dissipation. We inspected the valve seats, valve clearances, guides, valves and cylinder head surfaces. We also carried out a pressure-tightness test. This procedure involves immersing a properly prepared component in heated water and applying compressed air. Any escaping air can be identified by observing bubbles, indicating possible cracks or leaks.

We also inspected the camshaft. A visual examination and dimensional measurements were carried out on the cam lobes and main journals to identify signs of wear or damage to the working surfaces. The correct condition of the components controlling valve operation is essential for maintaining the engine's proper operating characteristics.

Next, we assessed the lubrication system, cooling system components and engine accessories. We inspected the turbocharger for axial and radial play and checked the condition of other components working alongside the power unit. Electrical accessories, including the alternator and starter motor, were also included in the inspection.

After completing all measurements and inspections, we were able to determine the necessary scope of work. In the case of the Volvo D12E engine, the main reason for the overhaul was natural wear resulting from high mileage and intensive operation. The detailed inspection allowed us to establish which components required refurbishment or replacement and which could be reused. This means that the overhaul is not based on replacing parts indiscriminately, but on restoring the engine to the required technical condition.

### Volvo D12E Engine Overhaul and Component Refurbishment

After completing the inspection, we proceeded with the actual Volvo D12E engine overhaul. The scope of work was determined based on measurements and the assessment of individual components. During the rebuilding of an engine, it is particularly important to follow the correct sequence of operations, maintain assembly accuracy and ensure that all mating components meet the required dimensional specifications. Even high-quality replacement parts cannot guarantee proper engine operation if they are installed without the necessary checks.

#### Crankshaft-Piston Assembly Refurbishment

The crankshaft-piston assembly is one of the most important engine systems. It converts the energy generated during fuel combustion into rotational movement of the crankshaft. During intensive operation of the Volvo A40E articulated dump truck, these components are exposed to significant mechanical and thermal loads. For this reason, their proper inspection and preparation for reassembly are essential to the durability of the completed overhaul.

As part of the work on the crankshaft-piston assembly, we pay particular attention to the condition of the pistons and piston rings. The piston skirt surfaces, ring grooves and areas in contact with the cylinder liners are carefully inspected. Wear in these components can lead to reduced cylinder sealing, increased blow-by gases entering the crankcase and excessive oil consumption.

Another important stage is the inspection of the cylinder liners. We check their working surfaces, wear condition and dimensions. If the measurements fall outside the permitted limits, replacement is necessary. New components must be properly prepared to work with the pistons and piston rings. Correct matching of these components affects combustion chamber sealing and lubrication conditions during engine operation.

We also pay close attention to the crankshaft. Its journals must have the correct dimensions and surface finish to ensure proper cooperation with the bearings. If measurements indicate that refurbishment is possible, the crankshaft may be reground to the appropriate undersize specification. The correct matching bearings must then be selected. Before reassembly, we also check the oil passages for blockages, as contamination can lead to insufficient lubrication and rapid engine damage.

The connecting rods are also inspected. They transfer forces between the pistons and the crankshaft, so their geometry and mating surfaces must meet the required technical specifications. During preparation, we also check the connecting rod bolts and fastening components. Each component must be thoroughly cleaned and inspected again before installation.

#### Cylinder Head Repair and Preparation

The Volvo D12E cylinder head is responsible for proper valve operation, combustion chamber sealing and cooperation with the intake and exhaust systems. Its condition has a direct impact on engine performance. During the overhaul, we carried out a detailed assessment of the cylinder head components, paying particular attention to wear on the valve seats, guides and valves themselves.

When a cylinder head is suitable for refurbishment, the standard scope of work includes resurfacing, replacement of valve guides and replacement of valves according to the inspection results. Before machining begins, however, it is essential to confirm that the cylinder head can be reused. This is why pressure testing is an important part of the process, as it helps identify possible cracks and internal leaks.

We also inspect the condition of the valve seats and their contact with the valves. Proper contact between the valve surfaces is essential for maintaining cylinder sealing. Leaking valves can cause compression loss, difficult starting and reduced engine power. The inspection also covers the valve guides, which ensure correct guidance of the valve stems during operation.

After the necessary refurbishment work has been completed, the cylinder head is inspected again. We check the prepared surface, the condition of the valve components and overall tightness. Only after successful verification can the cylinder head proceed to the engine assembly stage.

#### Fuel System and Engine Accessories Inspection

During the Volvo D12E engine overhaul, we also inspect the fuel system and engine accessories. Correct fuel delivery has a direct impact on combustion, power output, engine smoothness and fuel consumption. We verify the condition of the fuel injection components and assess whether they are suitable for further operation.

If the inspection indicates irregularities in the operation of the injection pump, it is subjected to a detailed test on a specialised test bench. This allows us to assess the pump's operating parameters and determine whether refurbishment is required. Injectors also require careful inspection, as their condition affects fuel atomisation quality and the even operation of individual cylinders.

We also inspect the turbocharger. The assessment includes checking the impeller and measuring axial and radial play. A faulty turbocharger can restrict the amount of air supplied to the cylinders, resulting in reduced engine performance. The intake pipes and connections are also checked, as leaks in this system can lead to improper engine operation.

As part of the accessory preparation process, we inspect the starter motor and alternator. The starter motor must provide sufficient cranking speed when starting the engine, while the alternator is responsible for maintaining the correct charging voltage in the machine's electrical system. Other components that affect safe starting and operation of the power unit are also inspected.

#### Professional Volvo D12E Engine Assembly

Once refurbishment and component preparation have been completed, we proceed with assembling the Volvo D12E engine. This stage requires a high level of precision because the correct cooperation of individual components depends on maintaining the specified dimensions, assembly clearances and tightening torques. Every operation is carried out in accordance with the technical requirements applicable to the engine.

The work begins with preparing the engine block and checking the surfaces intended for the installation of subsequent components. The properly prepared crankshaft-piston assembly components are then installed. During piston, liner and connecting rod installation, particular attention is paid to correct positioning and the free movement of mating components. The next stage involves installing the crankshaft and bearings, followed by checking the resulting clearances and ensuring that the crankshaft rotates correctly.

After assembling the lower section of the engine, we proceed with installing the cylinder head. The prepared surfaces must be clean and properly protected against contamination. The cylinder head is installed using the appropriate sealing components. The bolts are tightened according to the required procedure, following the correct sequence and tightening specifications. We then prepare and install the remaining valve mechanism components and engine accessories.

Preparing the lubrication system is also an important part of the assembly process. All oil passages must be clear, and the components responsible for oil distribution must be installed correctly. Before starting the engine, it is essential to ensure suitable lubrication conditions. This helps reduce the risk of mating surfaces operating without an adequate oil film during the initial start-up phase.

During assembly, we also pay attention to seals and mating surfaces. Leaks can lead to oil or coolant loss and problems with the proper operation of individual systems. For this reason, all components are prepared with great care, and once assembly is complete, we carry out an additional inspection to ensure that the engine is correctly assembled.

The prepared Volvo D12E engine is then ready for the next stage: start-up and testing on the WIBAKO engine dynamometer. This allows us to assess the engine under controlled conditions before it is reinstalled in the Volvo A40E articulated dump truck.

### Volvo D12E Engine Testing on the WIBAKO Engine Dynamometer

One of the most important stages of the Volvo D12E engine overhaul is testing it on an engine dynamometer. At WIBAKO, we have a dedicated testing facility that allows us to run engines under controlled load conditions. This means we can assess not only whether the engine starts correctly, but also how it performs under loads similar to those encountered during actual operation in construction machinery.

Dynamometer testing is particularly important for engines used in heavy-duty machines such as the Volvo A40E articulated dump truck. During material transportation, the engine operates under varying loads for extended periods. Simply starting the engine and checking its operation at idle does not provide sufficient information about its actual technical condition. Only load testing allows us to assess the engine's behaviour when operating under increased power demand.

After mounting the engine on the dynamometer, we prepare all the necessary systems for testing. We check the connections, fluid levels and basic operating parameters. We then start the engine and carry out an initial inspection. At this stage, it is particularly important to check oil pressure, operating temperature and idle stability. We also monitor the engine for unusual noises, vibrations or leaks.

Once the initial inspection has been completed successfully, we begin the engine break-in process. Engines that have undergone an overhaul should not immediately operate under maximum load. During the initial phase, suitable conditions must be provided for the mating surfaces of new and refurbished components to work together. For this reason, the engine runs for at least 16 operating hours under light conditions, at approximately 20-30% of its rated load.

During this period, our mechanics regularly monitor the operating parameters. We observe coolant and oil temperatures, lubrication pressure and engine stability. It is also important to monitor any leaks or irregularities that may appear during extended operation. If the engine maintains the correct operating parameters, we can proceed to the next stage of testing.

After the initial break-in period, we gradually increase the load. The Volvo D12E engine undergoes further tests in which we check its performance at different load levels and engine speeds. Changing operating conditions allows us to assess how the engine responds to increased power demand. Repeated transitions between different load ranges help identify irregularities that may not be noticeable when the engine is running without load.

During testing, particular attention is paid to the lubrication system. Oil pressure must remain within the required range under different operating conditions. We also monitor engine temperature, as excessive temperature increases may indicate cooling system problems or other irregularities. Engine speed stability and overall running characteristics are also checked.

The dynamometer also allows us to assess engine behaviour when increased torque is required. This is particularly important for the Volvo A40E articulated dump truck, as the machine must maintain the correct operating characteristics when starting, climbing gradients and transporting a full load. The engine should respond smoothly to changes in load and maintain stable operation across different speed ranges.

Load testing also provides an opportunity to check the tightness of connections again. During operation under load, individual components reach temperatures and operating conditions that differ from those experienced when the engine is stationary. We therefore inspect the cooling and lubrication system connections, as well as other areas where leaks may occur. We also check the accessories and the stability of all systems working alongside the engine.

It is important to understand that dynamometer testing is not limited to a single increase in engine speed. It is a multi-stage process involving break-in, gradual load increases, operating parameter monitoring and repeated tests under different conditions. This approach allows us to determine whether the overhaul has delivered the expected results and whether the engine is ready for further operation.

For the customer, this provides an additional quality check before the engine is installed in the machine. When dealing with engines used in expensive construction machinery, the ability to perform load tests is particularly valuable. Any irregularities can be identified in the workshop, without having to remove the engine from the articulated dump truck again. Only after all tests have been completed successfully is the engine prepared for transportation and installation in the Volvo A40E.

### Installing the Overhauled Volvo D12E Engine in the Volvo A40E

After completing the overhaul and successfully passing the dynamometer tests, we proceeded to prepare the Volvo D12E engine for reinstallation in the Volvo A40E articulated dump truck. As with engine removal, our mobile service team can also carry out installation directly at the customer's site. This eliminates the need to transport the entire machine to the WIBAKO facility in Kojszówka.

Before starting the installation, we check that the prepared engine is complete and inspect the condition of the components that will be reused. We also verify the engine mounts and the installation space inside the machine. All mating surfaces and connections must be properly prepared to prevent dirt and contaminants from entering the systems connected to the power unit.

The engine is transported to the working location and prepared for lifting. Using a crane provided by the customer, we carefully lower the unit into the engine compartment. This operation requires precise manoeuvring because the Volvo A40E has a complex structure with numerous components located close to the engine. The power unit must be positioned correctly in relation to the mounts and other components.

Once the engine is correctly positioned, we proceed with installing the mounts. We check the engine position, the contact between mounting components and the condition of the bolted connections. All mounts must be tightened correctly to ensure stable engine operation while driving over uneven terrain. Articulated dump trucks are exposed to significant vibrations and changing structural loads, making correct engine installation particularly important.

The next stage involves reconnecting the systems working alongside the engine. We begin with the cooling system hoses, which must be routed and secured correctly. We inspect the connections, clamps and sealing components. The system is then prepared for filling with the appropriate coolant and subsequent leak testing.

We also pay close attention to the intake system. The air pipes must be connected correctly, and all hoses and joints must be properly seated. Leaks in the intake system can affect the amount of air supplied to the engine and consequently reduce its performance. For this reason, we inspect not only the connections themselves but also the condition of the pipes, mounts and sealing components.

Next, we connect the exhaust and fuel systems. We check the correct routing of the lines, their protection against contact with moving or hot components and the tightness of all connections. Particular attention is paid to areas exposed to vibration and mechanical stress during operation. Hoses and pipes must not be excessively bent or exposed to friction against adjacent components.

We then reconnect the electrical installation and install the remaining accessories. The condition of connectors, wiring and mounting components is checked. Every connection must be made correctly, as mistakes at this stage can cause starting problems or improper operation of the machine's control systems.

Once all components have been installed, we prepare the engine for its first start-up. We check the oil and coolant levels, filter condition and correctness of all connections. Where necessary, we carry out the required preparatory procedures for the fuel and lubrication systems. A visual inspection of the entire engine compartment is then performed.

The first start-up takes place under the supervision of our mechanics. We monitor engine behaviour, oil pressure, temperature and idle stability. We also check for fluid leaks, unusual noises or excessive vibrations. Particular attention is paid to the connections in the cooling system, air intake, exhaust and fuel systems.

After the initial inspection, we proceed with further engine operating tests. We test the engine's response to changes in speed and assess its behaviour under different operating conditions. Then, with the machine operator present, we carry out functional tests of the articulated dump truck. This allows us to assess engine performance under real operating conditions, when it is working together with the other Volvo A40E systems.

During these tests, we pay attention to acceleration smoothness, operating stability and the engine's response to increased load. We also check that all systems are functioning correctly and that no unusual symptoms are present. The operator's presence is important because they know the machine's operating characteristics and can assess whether its behaviour meets expectations during everyday work.

After the tests have been completed successfully, we check the tightness of all connections once again and inspect the overall condition of the engine compartment. We verify the fluid levels and ensure that all components have been installed correctly. At the end of the work, we prepare an installation report confirming the completed procedures and the successful inspection of the engine following installation.

This installation process allows us to return the Volvo A40E articulated dump truck to operation with its overhauled Volvo D12E engine. Our goal is not simply to position the engine correctly in the compartment, but also to check all systems working alongside it before handing the machine back to the customer.

### Volvo D12E Engine Maintenance After the Overhaul

Completing the overhaul and installing the engine in the machine does not mean that all activities related to its proper operation have come to an end. An overhauled engine requires appropriate monitoring during the initial operating period. That is why WIBAKO also offers maintenance services for engines following an overhaul. These include checking operating parameters, inspecting connections for leaks and replacing filters according to the recommended maintenance schedule.

**We recommend carrying out the first inspection after 50 operating hours.** During this visit, our mechanics travel to the customer and inspect the engine directly in the machine. The service is not limited to replacing filters and oil. We also check the overall condition of the accessories, engine mounts, pipe connections and the tightness of the cooling, lubrication, intake and exhaust systems.

The inspection after the first 50 operating hours is particularly important because it allows us to assess how the engine performs after the initial period of operation. During machine use, minor leaks or irregularities may appear that were not noticeable during the tests carried out immediately after installation. Detecting such problems early helps reduce the risk of more serious failures and unplanned downtime.

After the first inspection, we recommend carrying out further checks every 250 operating hours, but at least once every 3 months. Regular maintenance helps keep the engine in good technical condition and allows us to monitor its parameters throughout further operation. The inspection schedule should also be adjusted to the machine's working conditions and the manufacturer's recommendations.

WIBAKO provides ongoing service support after the overhaul has been completed. If any unusual symptoms occur, we can perform diagnostics, assess the condition of the engine and recommend appropriate measures. This gives the customer access to a service provider familiar with the engine's repair history and the scope of the work performed.

### Which Machines Use Volvo D12 Engine Family Power Units?

Volvo D12 family engines are used in demanding industrial applications and machines that require high durability and reliable performance. Power units in this class are designed for long-term operation under heavy loads, which is why they can be found in various applications involving transportation, construction and earthmoving operations.

When working with Volvo machinery, it is particularly important to select parts and service procedures that match the specific engine version. The engine family designation alone is not always sufficient to determine component compatibility. For this reason, before ordering spare parts or starting an overhaul, it is worth checking the engine serial number, its designation and the machine identification details.

WIBAKO specialises in repairing and overhauling diesel engines used in various types of construction and industrial machinery. We service power units from manufacturers including Volvo, Caterpillar, Cummins, Deutz, Perkins, Yanmar, Kubota and Liebherr. Our work covers engines installed in crawler and wheeled excavators, wheel loaders, articulated dump trucks, backhoe loaders and other machines operating in demanding conditions.

Our experience also includes servicing Volvo machinery, including articulated dump trucks and other equipment used for material transportation. The scope of repairs is selected according to the specific model and type of fault. Depending on the requirements, we can perform diagnostics, engine removal, a complete overhaul, dynamometer testing and reinstallation of the power unit in the machine.

### Comprehensive Volvo Engine Overhauls at WIBAKO - Summary

The Volvo D12E engine overhaul in the Volvo A40E articulated dump truck demonstrates how important a comprehensive approach is when repairing power units operating under demanding conditions. A gradual loss of power and increased oil consumption may indicate progressive wear of internal engine components. In such cases, replacing a single component does not always produce the expected results. Detailed diagnostics, dismantling and inspection of all major components are necessary.

As part of this project, we carried out engine removal directly at the customer's site, transported the unit to our facility, inspected its components in detail, performed the necessary refurbishment work and prepared the engine for further operation. An important stage was testing on our engine dynamometer, which allowed us to check the unit under controlled load conditions before reinstalling it in the machine.

At WIBAKO, we combine workshop facilities with the ability to carry out work directly at the customer's location. Our mobile service team performs engine removal and installation on construction machinery throughout Poland. Engines requiring an overhaul are transported to Kojszówka, where we carry out comprehensive rebuilding. This allows us to provide customers with a complete service covering both workshop repairs and the subsequent start-up of the machine.

An important part of our offer is also the possibility of continued maintenance after the overhaul. We can perform the first inspection after 50 operating hours, followed by further checks every 250 operating hours or at least once every 3 months. This approach allows us to monitor the engine's condition and reduce the risk of unplanned downtime.

If you operate a Volvo A40E articulated dump truck or another machine equipped with a Volvo engine and notice reduced power, increased oil consumption, starting difficulties or unusual engine noises, it is worth starting with professional diagnostics. WIBAKO provides comprehensive diesel engine servicing, engine overhauls, dynamometer testing and mobile engine removal and installation.

Find out more about our services on the pages dedicated to [construction machinery servicing](https://wibako.com/serwis-maszyn-budowlanych), [diesel engine overhauls](https://wibako.com/remonty-silnikow) and [construction machinery spare parts](https://wibako.com/sklep).

### Need a Volvo Engine Overhaul?

We provide comprehensive overhauls of diesel engines used in construction machinery. Our services include diagnostics, component refurbishment, dynamometer testing and mobile engine removal and installation. Contact WIBAKO to discuss the repair options available for your engine.

[+48 33 870 42 00](tel:+48338704200) [biuro@wibako.pl](mailto:biuro@wibako.pl) [Formularz](https://wibako.com/contact)

Published: 2026-11-16

---

Source: https://wibako.com/about-us/news/934-renovation-of-the-volvo-d12e-engine-in-the-volvo-a40e-articulated-hauler
Contact: +48338704200, biuro@wibako.pl
