# Perkins 1004-40T Engine Overhaul

> Discover the comprehensive overhaul of a Perkins 1004-40T engine carried out by our expert team. From replacing the engine block to installing a new oil pump, clutch, and water pump, we've ensured top performance. Learn about our process, including the use of a new set of seals, gaskets, and filters, and our thorough testing on an engine dynamometer.

### A Perkins 1004-40T engine overhaul was carried out in our company.

The engine overhaul included, among other things, the replacement of the engine block, crankshaft bearings, connecting rod bearings and bushings, as well as pistons with rings. A regenerated fuel pump and injectors and a new feed pump were installed in the fuel system. The timing gear was equipped with a new camshaft and pushrod cups. In the lubrication system, a new oil pump, new piston lubricators and a new pressure sensor were installed. In addition to the above, new clutch and water pump were installed.

In addition, the following were regenerated: connecting rods, cylinder head, turbocharger, and starter and alternator. The engine block was sleeved.

Finally, the engine was assembled on a new set of seals, gaskets and filters.

After the repair, the engine was checked and preliminarily run in on the engine dynamometer in our workshop.

Published: 2024-09-16

---

Source: https://wibako.com/about-us/news/205-perkins-1004-40t-engine-overhaul
Contact: +48338704200, biuro@wibako.pl