# Deutz BF4M2012C Engine Overhaul

> Discover the comprehensive repair process of a Deutz BF4M2012C engine from a Terex-Finlay 883 screener. From the replacement of main bearings, rod bearings, and bushings to the installation of refurbished injectors and fuel pumps, learn about the detailed steps taken to ensure optimal performance. The article also covers the regeneration of various engine parts and the final assembly process.

**In our workshop, a Deutz BF4M2012C engine from a Terex-Finlay 883 screener was repaired.**

The engine rebuild included, among other things, the replacement of main bearings, rod bearings and bushings, as well as pistons with rings. In the fuel system, refurbished injectors and fuel pumps were installed. In the lubrication system, a new oil pump and piston nozzles were installed. The cooling system gained a new coolant pump and thermostat.

The camshaft was in very good condition, it only required polishing.

In addition, the following were regenerated: crankshaft, connecting rods, cylinder head, turbocharger and engine block.

Finally, the engine was assembled on a new set of seals, gaskets and filters.

After the repair, the engine was checked and preliminarily run-in on the engine dynamometer in our workshop.

Published: 2024-08-29

---

Source: https://wibako.com/about-us/news/177-deutz-bf4m2012c-engine-overhaul
Contact: +48338704200, biuro@wibako.pl