# Cummins M11 Engine Overhaul

> Discover the comprehensive repair process of a Cummins M11 engine from a Case wheel loader in our workshop. Learn about the replacement of key components, regeneration of parts, and the final testing on our engine dynamometer.

**A Cummins M11 engine from a Case wheel loader was repaired in our workshop.**

The engine repair included, among other things, the replacement of pistons, rings, main bearings, rod bearings, and bushings. In the fuel system, refurbished injectors and a serviced injection pump were installed. The cooling system received a refurbished water pump and a new thermostat. The worn oil pump was replaced with a new one.

In addition, the following were regenerated: the crankshaft, connecting rods, cylinder head, camshaft, turbocharger, and starter.

Finally, the engine was assembled with a new set of seals, gaskets, and filters.

After the repair, the engine was tested and preliminarily run-in on the engine dynamometer in our workshop.

Published: 2024-08-29

---

Source: https://wibako.com/about-us/news/168-cummins-m11-engine-overhaul
Contact: +48338704200, biuro@wibako.pl